`

modprobe --- no symbol version for struct_module

阅读更多
这个错误很可能是由于 kernel version 不一致导致的
分享到:
评论

相关推荐

    Ubuntu安装nvidia驱动步骤

    4、重装NVIDIA驱动:sudo ./NVIDIA-Linux-x86_64-455.45.01.run -no-x-check -no-nouveau-check -no-opengl-files 5、Nvidia-smi查看是否安装成功(nvidia-smi -L查看显卡具体信息) 6、安装成功后重启

    2、kubernetes的Kubeadm 部署安装

    kube-proxy开启ipvs的前置条件 modprobe br_netfilter cat > /etc/sysconfig/modules/ipvs.modules <<EOF #!/bin/bash modprobe -- ip_vs modprobe -- ip_vs_rr ...bash /etc/sysconfig/module

    Linux内核漏洞利用技术:覆写modprobe_path .pdf

    Linux内核漏洞利用技术:覆写modprobe_path 安全架构 安全架构 业务风控 系统安全 APT

    libforensic1394-0.2.tar.gz

    A recent version of Linux running a 2.6.22 kernel (or later) with the ‘Juju’ stack compiled either into the kernel or as a loadable module. Presence of the new stack can be determined by ...

    cp201x资源启动程序

    The TLL System Design Environment (SDE) running on the host PC comes pre-configured with the required settings for serial-UART communications between the host PC and the TLL6527M base module....

    nao_kinnect:Kinnect 和 Nao

    $ echo "blacklist gspca_kinect" |sudo tee -a /etc/modprobe.d/blacklist.conf 将用户添加到 plugdev 组 $ sudo adduser <username> plugdev 并检查 $ freenect-glview ROS环境 $ source /opt/ros/hydro/setup...

    iptables不错脚本

    modprobe ip_tables > /dev/null 2>&1 modprobe iptable_nat > /dev/null 2>&1 modprobe ip_nat_ftp > /dev/null 2>&1 modprobe ip_nat_irc > /dev/null 2>&1 modprobe ipt_mark > /dev/null 2>&1 modprobe ip_...

    secpwgen:ŽeljkoVrba创作的secpwgen的来源-可在http中打包下载

    secpwgen 对于源撰写的 同时运行两个熵守护程序: 和 对于KVM另请参见 对于hw_random您需要启用: CONFIG_HW_RANDOM=m CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_HW_RANDOM_INTEL=m ...modprobe timeriomem-rng

    Plymouth-lite

    普利茅斯轻 普利茅斯(Plymouth)Lite修补并准备用于Raspberry Pi 安装和配置 您需要将plymouth-lite-start.service更改为此 ExecStart=/usr/bin/echo 0 > /sys/class/graphics/fbcon/cursor_... modprobe -qab ${ear

    TL-WN725N-V2-Driver-for-Linux:TL-WN725N V2 Linux 驱动

    TL-WN725N-V2-Driver-for-Linux TL-WN725N V2 Linux 驱动 支持 Linux 3.7.0- 支持 Linux 3.7.0+(已测试) 安装 准备 linux 头文件 从 Github 获取源代码 git clone ...

    bcache.ko(kernel-3.10.0-862.el7)

    centos7新增bcache模块,内核版本kernel-3.10.0-862.el7,不用编译,直接将此文件放到/lib/modules/3.10.0-862.el7.x86_64/kernel/drivers/md/下加载即可 cp ./bcache.ko /lib/modules/3.10.0-862...modprobe -f bcache

    ioctl_beep.zip_linux beep_linux beep modprobe

    linux下beep驱动,用交叉编译器编译成开发板上能用的驱动

    linux全志R16的linux系统编译的资料_20170502_1655.7z

    [sudo] password for rootroot: 正在读取软件包列表... 完成 正在分析软件包的依赖关系树 正在读取状态信息... 完成 下列软件包是自动安装的并且现在不需要了: fakeroot libalgorithm-diff-perl libalgorithm-...

    MAC-extraction-for-csitool:用于Linux 802.11n通道状态信息(CSI)测量工具的MAC地址提取插件

    sudo modprobe -r iwlwifi mac80211 sudo modprobe iwlwifi connector_log=0x5 在Matlab中: csi_trace = read_bf_file('csi-data'); csi_entry = csi_trace{1} csi_entry = timestamp_low: 276797143 ...

    Linux modprobe命令用法详解

    Linux modprobe命令 Linux modprobe命令用于自动处理可载入模块。 modprobe可载入指定的个别模块,或是载入一组相依的模块。modprobe会根据depmod所产生的相依关系,决定要载入哪些模块。若在载入过程中发生错误,在...

    RTL8821AU_Linux_v5.2.6.3_25025_COEX20171103-6c6d.20171106配r40平台.zip

    # modprobe 8811au 2. wifi_connect_ap_test 连接到路由器 DK5. 并获得 IP 3. 切换到 U 盘目录(USB hub 接在 R40 USB 1 上面, 8811au 和 U盘挂带 hub 下), 执行 stress 让 U 盘有轻微的读写操作。是为了更容易...

    pi-temperature:记录并显示从 Raspberry Pi 收集的温度

    目录要求JDK 7 Maven 3安装将温度传感器连接到 Raspberry Pi 并运行以下命令: sudo modprobe w1-gpiosudo modprobe w1-therm签出项目: git clone https://github.com/DWiechert/pi-temperature.git 构建项目: mvn...

    ubuntu thinkpad E540安装无线网卡wireless-RTL8723BE的方法

    =======这是驱动文件======= ubuntu thinkpad E540安装无线网卡wireless-RTL8723BE的方法. make sudo make install sudo modprobe rtl8723be sudo modprobe -r rtl8723be ...sudo modprobe rtl8723be

    linux中配置pptp服务器配置的方法

    modprobe ppp-compress-18 && echo MPPE is ok 2、安装所需的软件包: yum -y install ppp wget ftp://rpmfind.net/linux/epel/7/x86_64/p/pptpd-1.4.0-2.el7.x86_64.rpm rpm -ivh pptpd-1.4.0-2.el7.x86_64.rpm 3、...

    Oracle11g RAC 实施手册

    echo "options hangcheck-timer hangcheck_tick=30 hangcheck_margin=180" >> /etc/modprobe.conf 或者 echo " /sbin/modprobe hangcheck-timer hangcheck_tick=30 hangcheck_margin=180" >> /etc/rc.local 检测模块...

Global site tag (gtag.js) - Google Analytics